Archive for July, 2010

CYLINDER HEADS

These REV049 proprietary cylinder heads are heavy-duty, thick-wall casting designed for large displacement engines, with 40mm intake valves and 35.5mm exhaust valves, and machined for dual plug ignition application. Pair REV049 cylinder heads, complete with stainless steel valves, springs and retainers  (Call for Price) To order: Please call 760-244-3074, or CLICK HERE to download our […]

REVFLOW CARBURETOR

The RevFlow floatless carburetor incorporates guillotine slide throttle and mixture control, available from 30mm through 40mm.  Alternate air source/ram air filter sold separately. RevFlow carb price: 30 – 36mm  $(Call for Price) 38 – 40mm $(Call for Price) Alternate air source/ram air filter price:  $(Call for Price) Click here for a detailed technical study of […]

PROP EXTENSION

Revmaster propeller extensions are machined from 356 T6 aluminum. The bolt circle is SAE #1. For wooden propellers, Revmaster also provides front-plate machined from the same material. 3″ prop extension $(Call for Price) 4″ prop extension $(Call for Price) To order: Please call 760-244-3074, or CLICK HERE to download our printable order form (Adobe PDF).

MAG MOUNT HOUSING

Since 1968, the original Revmaster Accessory Housing for magneto ignition engines has been cast of 356 aluminum. The housing also supports the engine, starter, and magneto. Magneto mount housing $(Call for Price) To order: Please call 760-244-3074, or CLICK HERE to download our printable order form (Adobe PDF).

CONICAL BUSHING

The Revmaster accessory housing requires conical shock mount bushings. Originally Lycoming bushings were used between 1968 and 2001. Starting May 2002, Revmaster has introduced a new version formed from polyurethane instead of rubber. Set of 8 bushings $(Call for Price) To order: Please call 760-244-3074, or CLICK HERE to download our printable order form (Adobe […]

EXHAUST SYSTEM

Revmaster has exhaust sytems for the KR-2 and Q-2 as well as other popular airframes, manufactured of mild steel or stainless steel. Mild steel  $(Call for Price) Stainless steel $(Call for Price) To order: Please call 760-244-3074, or CLICK HERE to download our printable order form (Adobe PDF).

ENGINE MOUNT

Revmaster has designed and manufactured many engine mounts for various airframes. The average engine mount is welded using the GTAW process, also known as TIG. This process results in a high-quality weld. The material used is 4130 chrome-moly tubing of various diameters and wall thickness.   Please provide details regarding firewall dimensions. Available for various air […]

CYLINDERS

Cylinders are centrifugally cast chilled iron. The pistons are forged out of high quality aluminum alloy, machined and balanced in a set of four. There are two sizes of pistons, 92mm and 94mm, that are designed to be compatible with a 78mm to 82mm stroke crankshafts. The cylinder set also contains piston rings, wrist pins, […]

INTAKE MANIFOLD SET

The intake manifold set consists of three major parts;  the upper right, upper left, and lower center.  The Rev Flow Injector Carburetor is hose mounted on the lower center section of the intake manifold. The existing manifolds are manufactured from mild steel tubing and were designed for the dual port cylinder heads. Intake manifold set  […]

CDI IGNITION

The self-energized dual CDI ignition package incorporates the dual-plug capacitor discharge ignition, a 30 amp alternator, starter, flywheel, and accessory housing. No external electrical source (such as a battery) is required. Not presently available for retrofit, only for new engine orders. Please call 760-244-3074, or CLICK HERE to download our printable order form (Adobe PDF).